Spinner for A models. 108mm.
Span
aluminum cone and machined back plate, mounting screws
included. $88.
Spinner
(functional) for D models. 127mm.
Span
aluminum cone and machined back plate, mounting screws
included.
$115.00
G45/62 Shock
absorbing Motor Mount: This engine mount is designed so
that the engine mounts at the correct thrust angle. The system
also correctly locates the propeller hub
in the center of the cowl.
$124.50
OUT OF STOCK
Scale
Wheels with Aluminum Hubs
Light
and solid rubber tires. 390g./13oz each. specially designed for 1/5
scale Fw190.
Scale Bolts and Air valve cavity, Continental Logo,
140mm
x 30mm
$
Landing Gear custom manufactured from Sierra Giant featuring
scale locking down lock and oleo scissors. A truly work of
engineering just like the full size.
Mains:
$519.00
Tail retractable fork (air) :
$119.00
Tail wheel with scale aluminum hub
(73mm) :
$29.00
Door Collars (6) as seen on strut
picture above:
$35.00
Weight reduction
kit with wood laser cut parts:
These were designed to fit
the SisT or any 1/5 scale Fw190. They will build very scale
and about half the weight of molded Fiberglass parts. They
require Solartex or similar covering. Saving 5 oz. in the tail, will save 1
lb on the nose!
